涡轮基组合循环发动机分布式控制系统通信网络混合拓扑结构优化方法

涡轮机组合循环(Turbine based combined cycle,TBCC)发动机控制系统通信网络拓扑结构是其分布式控制系统方案设计的重要部分,优化网络拓扑结构可提高发动机推重比和控制系统可靠性。本文基于智能优化算法提出TBCC分布式控制系统网络拓扑结构优化方法。基于图论建立TBCC几何模型和网格模型,以重量和可靠性为优化性能指标,同时考虑发动机表面高温区域以及控制节点的工作可靠性,分别采用粒子群算法和遗传算法优化星形结构中智能中央节点位置、中央节点的环形拓扑结构,获得星形-环形混合拓扑结构。仿真实例表明,基于本文方法优化所得的混合拓扑结构相较于星形集中式控制结构,系统重量降低了51.9%。     

Unsteady wakes-secondary flow interactions in a high-lift low-pressure turbine cascade

Detailed experimental measurements were conducted to study the interactions between incoming wakes and endwall secondary flow in a high-lift Low-Pressure Turbine (LPT) cascade. All of the measurements were conducted in both the presence and absence of incoming wakes, and numerical analysis was performed to elucidate the flow mechanism. With increasing Reynolds number, the influence of the incoming wakes on suppressing the secondary flow gradually increased owing to the greater influence of incoming wakes on reducing the negative incidence angle at higher Reynolds numbers, leading to a lower blade loading near the leading edge and suppression of the Pressure Side (PS) leg of the horseshoe vortex. However, the effect of unsteady wakes on suppressing the profile losses gradually became weaker owing to the reduced size of the Suction Side (SS) separation bubble and increased mixing loss in the free-flow region at high Reynolds numbers. Incoming wakes clearly improved the aerodynamic performance of the low-pressure turbine cascade at low Reynolds numbers of 25,000 and 50,000. In contrast, at the high Reynolds number of 100,000, the profile loss at the midspan and mass-averaged total losses downstream of the cascade were higher in the presence of wakes than in the absence of wakes, and the unsteady wakes exerted a negative influence on the aerodynamic performance of the LPT cascade.     

流动阻力及能量损失对注射成型制件的影响

本文分析了在塑料熔体充满型腔的过程中，流动阻力及能量损失产生的形式和物理原因，进而讨论了对塑料制件成型及凝固过程中的影响。并提出降低影响的措施。     

自由飞试验模型惯性矩的测定

作者根据多年来自由飞试验的实践,叙述了自由飞模型惯性矩的调试、计算、误差分析与处理的经验与方法。     

Progress in space weather predictions and applications

The methods of today’s predictions of space weather and effects are so much more advanced and yesterday’s statistical methods are now replaced by integrated knowledge-based neuro-computing models and MHD methods. Within the ESA Space Weather Programme Study a real-time forecast service has been developed for space weather and effects. This prototype is now being implemented for specific users. Today’s applications are not only so many more but also so much more advanced and user-oriented. A scientist needs real-time predictions of a global index as input for an MHD model calculating the radiation dose for EVAs. A power company system operator needs a prediction of the local value of a geomagnetically induced current. A science tourist needs to know whether or not aurora will occur. Soon we might even be able to predict the tropospheric climate changes and weather caused by the space weather.     

数据库开放对象的一般结构和操作

为了更精确地模拟客观世界，减少软件生成的复杂性，本文提出开放对象的数据模型，使其自身具有自组织、自我进化的能力，实质是面向对象＋人工智能＋数据库的一个模型。本文讨论了它的一般结构，开放对象的集合在子开放对象关系下构成有向图，并在对其加以适当限制做成偏序格的基础上，定义了一组开放对象的基本操作。     

双舌型挡板VGT蜗壳速度场的试验研究

使用IFA30 0热膜风速仪 ,通过选择合适的低通滤波器、合适的采样频率和采样时间 ,用X形探针测量了其无叶喷嘴出口速度的分布以及蜗壳流道的速度场。结果表明 :在两挡板全关时 ,喷嘴出口速度分布较均匀 ;随两挡板开度变化 ,喷嘴出口速度分布变化较大 ;而且沿蜗壳周向其径向速度分布较均匀 ,切向速度分布变化较大 ;沿蜗壳轴向 ,两者变化均较大。当两挡板开度变化时 ,蜗壳流道截面上通流速度的分布不同于自由涡流规律 ,二次流速度分量分布形态类似。     

柠檬酸钙酸解过程的建模与计算机控制

通过研究柠檬酸钙酸解过程中溶液电导率的变化规律，建立了酸解体系的数学模型，提出了改革酸解工艺路线中的物料添加顺序，并用计算机自动控制物料添加量和添加速率，自动判定酸解终点的方法。     

GDBMS中图形数据的表示与存贮

GDBMS是作者设计并实现的一个实验性的工程图形数据库管理系统。它基于扩充关系数据模型,成功地完成了对工程图形数据的描述。 本文从图形的数据库表示出发,对几何实体的建模方法进行了分析,介绍了GDBMS中的图形数据模型及其实现方法。该数据模型吸取图元枚举法(PI方法),结构实体几何表示法(CSG法)和边界表示法(BR方法)的优点,在进行交互式图形编辑以及图形显示时,采用CSG结构,在数据库的存贮和处理时,采用扩充的BR方法。     

水上飞机自由飞模型起飞与降落性能的综合试验

本文综述了用4台发动机为动力的水上飞机自由飞模型起飞与降落性能的综合试验,这些性能包括稳定性、操纵性、飞溅、水阻力、着水撞击、起飞砰击、失速及耐波性等。模型与真实飞机保持几何、质量、运动状态、拉力、升降舵效率及其波浪谱的相似,故模型试验与真实飞机的试飞结果比较符合。同时着重介绍了模型试验的机载测试系统与地面测试系统。